Using a 4G63 NT block...

[OWNDJOO]

ok, i found a 4g63 pulled from a '90 laser n/t. bare block. would this werk in a turbo? is it the same block? i'm tryin to find a block to build up. please help

[DSM614]

There is ALOT more work involved..(oil squirter's, pistons, tapping a knock sensor ect ect...) but you can do it! :thumb

[ucsigep]

yes, it will work.....after some other stuff.

From a friend who used a n/t block....

I'd really recommend a T block. My knock sensor used to go crazy because the NT block locates it up higher, closer to the valvetrain. I fixed it two weeks ago with a 3/4" brass spacer. Anyways...I had to buy oil jets($80) and have the block machined to accept them($80). That's the only real difference other than the pistons. I'm actually using NT rods.