PDA

View Full Version : Biss screw

ddimestalon
09-06-2003, 08:31 PM
How do i get this biss screw repalced. i just bought a new one, and when i went outside to replace the old one, its wouldnt screw all the way out. How do i get it out to replace it.
dsmsleeper
09-06-2003, 09:59 PM
You may want to try a magnet. If that doesn't work...maybe a small screwdriver.
biglipps66
09-07-2003, 12:21 AM
Just have to "fidget" with it for a bit.

Use a small small pair of needle noise to stick and and spread out to help pull it up... If you arent going to use it again... put a small dab of JB weld ontop the old one, stick a screw to it and wait an hour.. and yank it rite out :)
ddimestalon
09-07-2003, 06:40 AM
My grandma suggested a magnet. I might try a small screw driver as well
Mike C
09-07-2003, 10:33 AM
My grandma suggested a magnet. I might try a small screw driver as well

I wish I could get car tips from my Grandma, all I get is Bingo strategy tips :D
biglipps66
09-07-2003, 01:01 PM
My grandma suggested a magnet. I might try a small screw driver as well

I wish I could get car tips from my Grandma, all I get is Bingo strategy tips :D

I can make you feel young! My Grandma is only 59 lol :D :D :D
ddimestalon
09-07-2003, 02:39 PM
My grandma suggested a magnet. I might try a small screw driver as well

I wish I could get car tips from my Grandma, all I get is Bingo strategy tips :D

lol
birdsfoot
09-07-2003, 08:24 PM
well my GREAT grandpa is still alive and driving.
brian hoover
09-07-2003, 09:09 PM
can you warn us when she is out.
birdsfoot
09-07-2003, 09:53 PM
well sayin its a grandpa and last time i checked that ment male ill let you know when HE is out
plus he lives in southbend indiana so you dont have to worry
ddimestalon
09-12-2003, 11:31 AM
does the o-ring go on the actual screw, or does it go on the TB?
jplong
09-12-2003, 11:32 AM
on the screw....should be a groove in wher it fits..
ddimestalon
09-15-2003, 10:46 PM
I went to a local shop in toledo that specializes in dsms, so i could borrow some tools and they said the biss screw cant come out, and that i would need to take out the throttle body to get to it. Is this true?
biglipps66
09-16-2003, 07:12 AM
That shop = :down


Im telling you.. if your going to replace it.. DAB some JB weld on the top and stick a screw to it.. It will pull rite out man.
ddimestalon
09-16-2003, 10:28 PM
That shop = :down




lol. sweet ill do that