SmokinEAGLE
03-16-2009, 12:02 AM
Got the Galant VR4 running last night, and it ran well for 10-15 minutes. Shut it down to check the oil level and made no changes.
Pulled the pump and it was hanging off the pump assembly by only the plug, hooked the pump up to the battery and it does run. Re-secured the pump to the assembly and now the pump wont run (no fuel coming out of the return and cant hear it turn on).
MPI fuse seems ok, and all wiring seems ok as it ran with no changes to the wires.
When I got the car one of the wires on the assembly plug was cut, and 8 wires were cut on the ecu harness. All of the wires have been soldered but 2 that were cut too short on the harness, one is green one is white.
Is there anything I else I can check to see why there is no signal?
Pulled the pump and it was hanging off the pump assembly by only the plug, hooked the pump up to the battery and it does run. Re-secured the pump to the assembly and now the pump wont run (no fuel coming out of the return and cant hear it turn on).
MPI fuse seems ok, and all wiring seems ok as it ran with no changes to the wires.
When I got the car one of the wires on the assembly plug was cut, and 8 wires were cut on the ecu harness. All of the wires have been soldered but 2 that were cut too short on the harness, one is green one is white.
Is there anything I else I can check to see why there is no signal?