PDA

View Full Version : Still dont know what's wrong...


SlowMotiion
10-04-2003, 12:47 PM
My amp is still in this Protect mode or whatever it is... I checked all the wiring and fuses and everything seems to be great. Is there anything else that I could check? I need help! I need my musik back!

rollineclipse
10-04-2003, 12:53 PM
Amps go into protect mode when they are either blown or the gain is turned up 2 high. Disconnect the power from your amp and turn the gain down a decent amount. Then re-hook it back up and it should pop back on. If it doesn't then that means there is something wrong with the Amp.

nvr2fast4me
10-05-2003, 01:43 AM
I say you find an audio shop (ex: COlumbus Car Audio) and have them do a bench test to see whats up with it. Maybe give you a few pointers or fix it for free.

SlowMotiion
10-06-2003, 08:53 AM
Also... when i take the power off and reconnect it to the amp, the power light comes on first, then goes back to the protect light. How do I turn down the gain? I'm hoping that's the problem. Thanks guys.

rollineclipse
10-06-2003, 02:35 PM
The gain is a small knob or something like it that says level/power/gain one of those and just turn it to the left. I work on saturday taran if you wanna bring it to my work ill test it on our bench for ya.

GSXLR8
10-06-2003, 02:50 PM
OR, if you are around on friday and I'm working on my car around the corner from you, bring it by then too...I can take a look at it and should be able to get you a check for those headlights too.