Help w/ next mod

Hello,
I was wondering if anyne could help me out. I have 200.00 at this car places and I was wondering what I sould get for my car. I can spend more if needed.
I have a 95 esi talon a/t, the only thing done to it is an exhaust.
thanks alot
Alicia

[biglipps66]

Hiya,

You could do an intake system and get a few ponies and some groowwwling sounds.

[jplong]

AEM cold air intake....gave me bout 7 HP on the dyno....and it does give the motor a lower growl...i paid $219 back 2 years ago..

[1lowDSM]

underdrive pulley best bang for the buck

[Extreme GS]

I'd say a cold air intank, also. It's a very simple bolt-on and it makes your car sound a little better. Jared's also right, cam gears will give you some gains, but he knows it'a also a P.I.T.A. to install ;)

[JayC]

How a bout a ported head for $310. Wow I just hapen to have one.

[jplong]

thought you sold that.....brad may want dibs on that...

[suicidalsquirrel]

Best bet is to come to some gatherings and see for yourself what other club members do to their cars. Most of us are turbo guys, but there are some 420A's out there that can help you out more.

[1lowDSM]

yeh we have been helpin lol CAI is good better plugs and wires, underdrive pulley, over bored throttle body, port work, new motor mounts

[ESItalon95]

For the intake I was looking at a injien racing cold are intake. I have to buy motor mounts anyways cuz mine are bad can you get after market ones or anything? What do the pulley run and what is the best kind?
Thanks Guys
Alicia

[Iwishiwascool]

There is a quick and easy way to stiffen up and/or fix worn motor mounts. It will give you much more stiffness for about 10 bucks.

Step 1: remove 1 motor mount.
Step 2: Apply 3M Windoweld generously in the cracks and around the bolt cylinder
Step 3: Allow to dry for at least 2 days unless you are using a heat gun, then it could be done in a few hours.
Step 4: Install modified mount and remove different one. Repeat


Window weld is sold at napa and either advanced or the zone, I dont remember which.

[dsmarc]

For the intake I was looking at a injien racing cold are intake. I have to buy motor mounts anyways cuz mine are bad can you get after market ones or anything? What do the pulley run and what is the best kind?
Thanks Guys
Alicia
you the same person who started this post? just wondering if so why did you change your name... i get confused too easy.


i also would say a cold air intake. we just put one on one of my friends you would be surprised at the noise it can give out.
http://www.columbusdsm.com/forum/viewtopic.php?t=2754 or one of those ;) :D