EVO VIII guys! Sale at Quantum racing!

[Bryon@quantum]

Hey guys this is Bryon at Quantum Racing. It's sale time again!!!

Clearance::: ROSS RACING PISTONS regularly$650.00
now only$550.00

With full floating rist pins and spiro locks
Specifically for EVO VIII
8.5 comp ratio
Clearanced for new motors
New in box
Excellent street car forged piston
Couldn't wait on the pistons to get here to build a motor so we had to go for something else.
http://rosspistons.com/images/ROSS_01.jpg


Ported Head Packages..........Call For Details
http://www.quantum-racing.com/ws20img/ws20img_031211/inventory/410.jpg


Sheet Metal Intake Manifolds........Call For Details
http://www.socalevo.net/gallery/albums/gt40/top_view.jpg
PIPER CAMS!!!!IN STOCK http://www.quantum-racing.com/ws20img/ws20img_031211/inventory/379.jpg

RALLY KIT 265 deg. with 11.5mm lift!!! Excellent cam for EVO's up to/including big turbos and headwork. These will outflow and outtorque the lower lift HKS 272's, etc. note: these kits require valve spring kit!.....$916.00 shipped


Ferrea Valve Spring Kit......$550.00

Ferrea Valves.............$21.00 each

Greddy e-manage in stock.....$295.00
http://greddy.com/prodimages/eMan.jpg

Ing. harness...........$35.00

Boost harness with map sensor......$125.00


HKS Carbon TI Catback in stock ..........$750.00 shipped
http://hksusa.com/images_products/S_2061.jpg

HKS Down pipes in stock .............$365.00
http://hksusa.com/images_products/S_1152.jpg

HKS Racing Suction intakes in stock ......$340.00

http://hksusa.com/images_products/S_1615.jpg

http://hksusa.com/images_products/L_1297.jpg
HKS Turbo Timers with harness in stock .......$95.00


HKS 272 Camshafts in stock...........$569.00
http://hksusa.com/images_products/S_1252.jpg


HKS Cam Gears in stock...........$295.00
http://hksusa.com/images_products/S_1250.jpg



Perrin Front Mount Intercooler in stock......$1080.00 shipped

Perrin rear sway bar...$199.00

GT spec strut tower bars..ALM.
Front......................................$218.00
Rear.......................................$149.00

ARP Head Studs in stock ...........$110.00



ARP Con Rod Bolts in stock .........$60.00

Feel free to call us if you have any questions, at 937-642-5400 Ask for Mark or Bryon

Sales ask for Robin


Thanks,
Bryon
www.Quantum-racing.com

[Mike C]

Would you comment a little more on the cams. I've never heard of Piper and I searched around a little and came up with nothing. $916 for a set of cams is pretty hefty compared to anything else that I'm aware of. Just curious to learn :)

[Bryon@quantum]

Piper cams are very big in England.All the big euro.EVO tuners have been using them for a long time .They make very very big power gains all across the board.most of them are big lift short deration camshafts for less valve overlap=MORE POWER!!(when done right)They also have more stable idle that most.We can get almost any grind you would like the ines we have here would be great street/strip cams with265 deg. with 11.5mm lift. A little bit of a choppy idle but not bad at all.
Thanks
Bryon

[EvolvedDSM]

Have you dynoed them in comparison to HKS, JUN, etc... ?

[Bryon@quantum]

We have not tested them on a dyno,But an independent shop in europe tested them back to back on the same day with HKS 272 and the piper street kit made 30WHP more than the HKS,We sell all of the grinds piper cams offer, the Kit that we have in stock is the RALLY KIT that is one step up from the one tested :thumb

Thanks
Bryon
www.Quantum-racing.com

[Gunner]

That 30whp, is that peak, average or what? What does it do to the power band? Does it peak higher or lower? How flat is the torque curve? Where does the torque curve peak?

[Bryon@quantum]

Ill try to find the dyno sheet and post it for you ;)

Thanks
Bryon

[Bryon@quantum]

We do not have the dyno sheet. It was done independently by some very well respected members/shop guys in Europe. The higher lift cams like those are actually all very close in price. Check Tomei Procams for a reference. Generally the cams will pull more power and spool better while not hurting your idle as much as lower lift and higher duration cams.

Mark
www.Quantum-Racing.com

[Bryon@quantum]

Bump :thumb


Bryon